​Specifications

​Load: 20 lbs/square food of belt
Belt Widths: 6″ to 60″
Lengths: 36″ to 40′
Belt speed: 328 ft/min maximum
3.5″ diameter drive roller with cast-on Urethane lagging
UHMW Wear strip bed plate
Continuous TIG welded 304 stainless steel frame
#4 Polish on all outside surfaces
Bearing material is 400 stainless steel
Bearing lubricant is H1 type FDA lubricant
FDA approved belting and plastic components

Features & Benefits

Frame is designed with no horizontal surfaces for optimum cleaning.
Bearings are mounted in cast stainless steel housing for maximum performances in washdown environments.
Belt tensioning mechanism uses Acme threads for easy cleaning and is externally mounted to the frame with adequate clearances for cleaning
The tool-less tip up pulley allows conveyor end to be lifted for easily for quick access to inside of conveyor for cleaning.
Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
Drive spindle is Cast-On Urethane Lagging for increased load capacity. Spindle has grooved for V-guided belts for optimum performance.
Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
Nose bar idler ends (optional) are available in 1/2″, 1″ & 1 7/8″ for small product transfers.
Belt lifters (optional) lift belt from wear strips/bed plate by simply pulling an external lever for fast access and effective cleaning.
Belt scraper (optional) removes build up and adjusts easily for each application. Features tool-less disassembly/assembly for cleaning of parts.
Solid bed plate (optional) is stainless steel and locates on UHMW strips for delicate/fragile products.

7600 SERIES SANITARY CONVEYOR: GENERAL SPECIFICATIONS

Straight Flat and Cleated Belt Conveyor Models
Z-Frame Flat and Cleated Belt Conveyor Models (0 to 60°+)
Loads up to 20 lbs per square foot of conveyor belt (90 kg/m2)
Widths up to 60” (1524 mm)
Lengths 36” (914 mm) up to 480” (12.2 m)
Continuous TIG Welded 304 stainless steel frame