The Ultimate Series has been engineered for Fast & Effective Sanitation in the most demanding environments. These include RTE foods, raw protein (meat – poultry – fish), dairy and other environments with high pressure sanitation requirements.
Load: 20 lbs/square-foot of belt
Belt Widths: 6″ to 36″
Lengths: 36″ to 999″
Belt Speed: 233 ft/min maximum
UHMW Wear strip bed plate
Continuous TIG welded 304 stainless steel frame
#4 Polish on all frame surfaces
Bearing material is 400 stainless steel
Bearing lubricant is H1 type FDA lubricant
USDA Approved belting and plastic components
Meets USDA, NSF & AMI design specifications
Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10′ long consist of multiple sections which are bolted together (can be welded together on site).
Bearings are mounted in cast stainless steel housing for maximum performance in washdown environments
Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
the tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
Open Belt Tracking Flanges and solid UHMW idler pucks create access to pulleys.
Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
The return belt supports are segmented plastic slide blocks and are easily removed without tools for effective cleaning.
Drive sprockets are located on 1.5″ square stainless steel shaft without fasteners to provide optimum drive strength and cleanability.
Nose bar idler ends (optional) are constructed of machined UHMW bar to provide a 1.5″ diameter transfer.
The nose bar drive configuration (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning
TIG welded stand offs keep fasteners out of the food zone.